Fujitsu SPARC M10-4 Service Manual page 409

■
25.3 Enabling the Removal of a Crossbar
Cable (Optical)
■
■
Caution -
25.3.1 Inactive/Cold maintenance
Open the rack door.
Log in to the XSCF shell.
Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Power off the physical partition requiring maintenance.
Execute the replacefru command to release the SPARC M10-4S requiring
maintenance from the system.
XSCF> replacefru
Chapter 25 Maintaining the Crossbar Cables (Optical) 385