Fujitsu SPARC M10-4 Service Manual page 228

Confirm the hardware and software configurations.
Power off the physical partition requiring maintenance.
Execute the replacefru command to release the power supply unit requiring
maintenance from the system.
XSCF> replacefru
10.3.3 Inactive/Cold maintenance
Note -
Open the rack door.
Log in to the XSCF shell.
Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Power off the physical partition requiring maintenance.
Execute the replacefru command to release the chassis requiring maintenance
from the system.
XSCF> replacefru
Remove all the power cords from the PSU backplane unit of the chassis
requiring maintenance.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
204