Removing The Xscf Unit - Fujitsu SPARC M10-4 Service Manual

Hide thumbs Also See for SPARC M10-4:

Table of Contents

Remove all the power cords from the power supply unit of the crossbar box

requiring maintenance.

Removing the XSCF Unit

Remove all the cables connected to the maintenance-target XSCF unit.

Loosen the two screws (A in the figure) of the XSCF unit and lower the right

and left levers to release the XSCF unit.

Chapter 17　Maintaining the XSCF Unit of the Crossbar Box

Sparc m10-4s