Fujitsu SPARC M10-4 Service Manual page 175

Note -
If a filler unit for the CPU memory unit upper has been installed, hold the
packaging material (A and B in the figure) of the PCIe cable connector part
over the top of the left- and right-side guides (C and D in the figure).
Figure 7-64
C
A
Align the four clips on each of the left- and right-side guides to the grooves in
the frame of the CPU memory unit lower to install them. Slide in the guides to
lock them.
Note -
Note -
Chapter 7 Maintaining the CPU Memory Units
B
D
151