Removing The Fan Backplane; Accessing The Fan Backplane - Fujitsu SPARC M10-4 Service Manual

maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Stop the entire system.
Turn off the circuit breaker switches (CB switches) of the dedicated power
distribution unit (PDU) mounted on the rack for expanded connection.
22.4

Removing the Fan Backplane

Caution -
22.4.1

Accessing the fan backplane

Remove the front cover.
Remove all the fan units.
22.4.2 Removing the fan backplane
Loosen the two screws (A in the figure) securing the upper cover and then
slide the right and left stoppers (B in the figure) inwards. Then, remove the
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
352