Hardware - NEC Express 5800 User Manual

Hardware

NEC Express5800 Series
Express5800/A1080a-S, A1080a-D, A1080a-E
Hardware
Express5800/A1040a
This chapter describes hardware of the server.
"Names and Functions of Components" (page 76)
"Installation and Connection" (page 121)
"Basic Operation" (page 159)
"Upgrading Your Server" (page 174)
"NEC EXPRESSSCOPE® Monitor" (page 204)
"BIOS Setup" (page 277)
"RAID System Configuration" (page 321)
This section describes names and functions for each part of the server.
This section describes a location suitable for installing the server, how to
mount the server on mounting a rack mount chassis, and how to connect
connecters.
Describes how to turn ON/OFF the power and handle DVDs, etc.
Refer to this section when mounting options on the server.
Enables a user to turn ON/OFF power of the server, to check the system
information and status, and to set various networks.
Describes how to set BIOS using the dedicated utility.
Describes how to use internal hard disk drives as a RAID system with using
Internal RAID controller(NE3104-001/003) .
Hardware
74