Supported Oem Commands; General Description - NEC Express 5800 User Manual

Supported OEM Commands

General description

Below are the OEM commands which are supported.
Command
oemnecversion
oemneclogin
oemnecsol
oemnecreboot
oemnecspdump
oemnecpasswd
oemnecfirewall
oemnectrusthost
oemnecdate
oemnecforcedump
oemnecdisconnect
・ o
emnecversion
・ Format
oemnecversion
・ Parameter
None
・ Description
Display the version of the managemen firmware and the BIOS.
"BMCFW" means the management firmware.
・ Example
BMCFW Revision
BMCFW Build Time
BIOS Revision
BMCFW FLASHROM block layout:
Privilege Function
Operator Display the version of the management
firmware and the BIOS.
Operator Do remote login to the other management board.
SOL Connect to the SOL of the partition(server)
Administrator Reboot the management firmware
OEM Do SP Dump
Operator Change the login password
Administrator Set the firewall of the network protocol
Administrator Restrict the network access to the management
firmware by the original IP address.
Operator Display the management firmware date and time.
Operator Execute ForceDump(Take clush dump)
Administrator Network applications become disconnected.
: 0.0.3.5 ('SVN3510 test@example ')
: Jan 19 2010 20:32:19
: 1.00
538