Hardware Settings - NEC Express 5800 User Manual

1.4.7

Hardware Settings

Hardware Settings is displayed by selecting "Settings" and clicking "Hardware Settings" of
the menu on the left side of the screen.
Various settings for the system can be set in Hardware Settings.
(1)
(3)
(1) Clicking "Submit" enables to set the information of (3).
(2) Clicking "Default Select" enables to restore configuration status to default status.
(3) Configuration
Set the configuration information.
Switch DVD and Front USB : Switch the server connecting DVD and front USB
(2)
IMPORTANT:
 Do not change to "Server2" In A1080a-S model because
"Server2" doesn't exist in this model. If you have changed to
"Server2", you must switch to "Server1" again.
 Please run this operation when DC power is off because the
DVD drive may not be recognized depending on timing. If you
would like to switch to another DVD drive dynamically at DC
power is on, you need to run procedure same as USB device
inserting/removing.
408