Processor Memory Modules Adding/Mounting Rule; Rules Of Adding Processor Memory Modules - NEC Express 5800 User Manual

Processor Memory Modules Adding/Mounting Rule

The following describes how to mount processor modules when adding the modules.

Rules of Adding Processor Memory Modules

For A1080a-S,A1040a Model
Order of
Mount Slot
#1
First ●
Second ●
Third ●
Fourth ●
 Processor Memory Module #1 is required.
 Add in the order of lowest to highest number, i.e., #2, #3, and #4.
For A1080a-D Model
Order of
Mount Slot
#1
First ●
Second ●
Third ●
Fourth ●
Fifth ●
Sixth ●
Seventh ●
 Processor Memory Modules #1 and #5 are required.
 Add in the order of lowest to highest number of each server, i.e., #2, #6, #3, #7, #4, and #8.
IMPORTANT:
Note that the rule of adding modules differs depending on the
model such as A1080a-S, A1080a-D, and A1080a-E.
IMPORTANT:
When the Processor Memory Module is added or exchanged,
it is necessary to set "Core Status" from System Web Console.
Refer to Setting CoreStatus.
Processor Memory
Module Number
#2 #3 #4
■
♦ ■
♦ ♦ ■
Processor Memory
Module Number
#2 #3 #4
■
♦
♦ ■
♦ ♦
♦ ♦ ■
♦ ♦ ♦
IMPORTANT:
A1080a-D model can adopt a different configuration for each
server by using the configuration change service at the time of
purchase.
81
#5 #6 #7
- - -
- - -
- - -
- - -
#5 #6 #7
●
●
● ■
● ♦
● ♦ ■
● ♦ ♦
● ♦ ♦
Hardware
#8
-
●: Required
-
♦ : Already Mounted
-
■: Adding
-
#8
● : Required
♦ : Already Mounted
■ : Adding
■