NEC Express 5800 User Manual page 345

Scan Devices
When you select [Scan Devices] on WebBIOS Home Menu and press Enter, the HDDs
connected are detected again. Use this feature when you have installed a new HDD additionally
while the WebBIOS is running.
IMPORTANT:
● If the newly connected HDD contains another configuration
information, [Foreign Configuration] screen as shown below
appears. To use the HDD as new one, select [Clear] and press
Enter to clear the configuration information in HDD.
● If you use Universal RAID Utility to configure a RAID system using
the newly connected HDD containing another configuration
information, first clear another configuration information using
this Scan Devices feature.
(*) Universal RAID Utility does not have this feature.
345
Hardware