Pci Card Mounting Rule - NEC Express 5800 User Manual

PCI Card Mounting Rule

(1) PCI slot 1 ················ RAID supported slot *1
(2) From rear left
PCI slot 2 ················ WOL supported slot *2
PCI slot 3
PCI slot 4
PCI slot 5
PCI slot 6
PCI slot 7 ················ x16, Middle size supported slot *3
(3) From rear left
PCI slot 8 ················ WOL supported slot *2
PCI slot 9
PCI slot 10
PCI slot 11
PCI slot 12
PCI slot 13 ·············· x16､Middle size supported slot *3
(4)·· PCI slot 14
(5) Management Module 1
(6) Management Module 2 if A1080a-D
Supported Functions
*1 SAS RAID Card Supported
*2 Wake On Lan (WOL) Supported
Middle size and PCIe x16 Supported
*3
RAID supported slot if A1040a *1
RAID supported slot *1
IMPORTANT:
● Other PCI cards can also be mounted to the slot when the
functions in the above table are not used.
IMPORTANT:
● The default setting of OPROM for PCI slot7 is Disabled if A1040a.
Change the setting to Enable when using SAS RAID card on PCI
slot7 in A1040a model referring "Slot Configuration" of the "BIOS
Setup" section in thie User's Guide.
Supported PCI Slots
PCI slot 1
PCI slot 7 if A1040a
PCI slot 14
PCI slot 2
PCI slot 8
PCI slot 7
PCI slot 13
101
Hardware