Management Module - NEC Express 5800 User Manual

Management Module

The following image shows connectors mounted on the management board.
Each connector is the same when two management modules are mounted. Refer to "LED
Description" for details on LEDs.
(6)
(7)
(9)
(11)
(1)
(1) ID Button
(2) Reset Button
(2)
(3) USB Port
(4) USB Port
(3)
(5) USB Port (for maintenance)
(4)
(6) Monitor Connector (VGA)
(7) Serial Connector (RS-232C D-sub 9pin)
(8) LAN Connector *1
(5)
(9) LAN Connector *2
(10) LAN Connector
(8)
(11) LAN Connector
(10)
IMPORTANT:
Note that (5) the USB for maintenance and (9) the maintenance
LAN are for maintenance service personnel and cannot be used by
customers.
107
Rear of Server
10BaseT/100BaseTX/1000BaseT
10BaseT/100BaseTX
10BaseT/100BaseTX/1000BaseT
10BaseT/100BaseTX/1000BaseT
*1 (8) : Management LAN for customers
*2 (9) : Maintenance LAN for maintenance service
l
Refer to the next page for the description.
Hardware