NEC Express 5800 User Manual page 138

Hardware
16. Remove dog-leg plates from the cable cover. The dog-leg plates are fixed by four screws in
the depositions circled in red shown below.
Be careful not to lose the removed 4 screws as they will be used later.
17. Attach the plate 1 to the plate 2 by using the four screws removed in step 16.
Attach the plate by adjusting to avoid interference of the cable arm with the cable cover and
also to avoid interference of the cable with the cable cover when mounting the cable to the
cable arm, as well as by having the large distance between screws in the forward and
backward direction.
Plate 1
Length 8mm x 4
Cable Arm
Cable
138
Plate 2
Large
Distance
Avoid
Interference
Cable Cover