NEC Express 5800 User Manual page 543

SOL Console Log
It is possible to refer the newest SOL Console Log , 120,000 bytes maximum, when executing
oemnecsol command with "-c" option. Below shows the key bind.
If any escape sequences are included in the console log, the display may have disorder. If the
management firmware is rebooted, the log will be disappeared.
-> oemnecsol –c <baud rate (bps)>
Key
+
-
F
L
CTRL+B or q
?
・ oemnecreboot
・ Format
oemnecreboot [--force]
・ Parameter
None
・ Description
This command reboots(reset) the management firmware. Execute this command to have
the new Management firmware available after the managemern firmware is updated.
It is executable when the server is stable,while DC OFF , EFI shell or OS is running.
・ Example
-> oemnecreboot
Function
Go to next page
Go back to previous page
Jump to the oldest page
Jump to the newest page
Return to SMASH-CLP console
Help
IMPORTANT:
• Don't use this command imprudently while the system is
operating.
• To reboot without any condition, add force option
• NEC unrecommends the firmware update rebooting to you
while the DC power is on because the application of the OS
may not work well.
543