NEC Express 5800 User Manual page 537

・ stop
The format of stop command is shown below.
stop [<options>] [<target>]
To shut down (soft off) the partition(server), execute such as below.
-> stop partition1
COMMAND COMPLETED :
stop partition1
ufip=/partition1
Stop: Target stopped successfully
It is possible to power off the partition(server) compulsory by adding the "-f" option.
-> stop –f partition1
・ version
The format of version command is shown below.
version
IMPORTANT:
•There is a risk to break the OS disk if the power is off
compulsory during OS is operationg.
HINT:
•The version displayed by this command is of SMASH-CLP but
not management firmware.
537