When You Fail To Eject - NEC Express 5800 User Manual

Hardware

When you fail to eject:

When you fail to eject the tray with the tray eject button and cannot take out the CD/DVD-ROM
from the server, follow the procedure below.
1. Press the POWER switch to power off the server.
2. Insert a metal pin of approximately 1.2mm
In dismeter and 100mm in length(a strainghtend
large paper clip will make a substitute) into the
emergency hole on the lower front of the DVD
drives and gently push it in the tray is ejected.
IMPORTANT:
● Do not use a toothpick or plastic
stick that is easy to break.
● If the above procedure does not
let you take out the CD/DVD-ROM,
contact your service
representative.
3. Hold the tray and pull it out.
4. Take out the CD/DVD-ROM.
5. Push the tray back into the drive.
172