Windows - NEC Express 5800 User Manual

Express5800 series
Hide thumbs Also See for Express 5800:
Table of Contents

Advertisement

Windows

Warning of the following contents may be logged to the system event log when starting
up Windows Server 2008 R2 system.
Event ID:
27
Source:
e1qexpress
Type:
Warning
Description: Intel(R) 82576NS Gigabit Ethernet Controller
Network link has been disconnected.
→ When the above is logged upon startup of the system or installing the Starter Pack, there is no
problem on system operation.
Following system event log may be logged when Windows Server 2008 R2 is installed.
Event ID:
134
Source:
Microsoft-Windows-Time-Service
Type:
Warning
Description: NtpClient was unable to set a manual peer to use as a time source because of DNS
resolution error on ' '. NtpClient will try again in 3473457 minutes and double the
reattempt interval thereafter.
→ There is no problem on system operation.
Following warning may be logged in the application event log at updating the system
when Windows Server 2008 R2 is installed.
Event D:
63
Source:
WMI
Type:
Warning
Description: A provider, Ncs2, has been registered in the Windows Management Instrumentation
namespace, Root¥IntelNCS2, to use the LocalSystem account. This account is
privileged and the provider may cause a security violation if it does not impersonate
user requests.
→ There is no problem on system operation.
Following application event log may be logged in the application event log when Windows
Server 2008 R2 is installed.
Event ID:
1534
Source:
Microsoft-Windows-User Profiles Service
Type:
Warning
Description: Profile notification of event Create for component
{56EA1054-1959-467f-BE3B-A2A787C4B6EA} failed.
601
Operation and Maintenance

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents