NEC Express 5800 User Manual page 60

4. Setup for Troubleshooting
Set up the server to prepare troubleshooting for judging or resolving the cause of failure
immediately. The setup for Windows Server 2008 and Windows Server 2008 R2 are described in
this Guide.
5. Installation and Setup of Management Software
Set the each parameter of installed software to match your hardware/network environment.
Define the management PC on a network connectable to the server and install the software for
the management monitoring.
Refer to "Software" for details.
6. System Information Backup
After changing the hardware configuration or changing the BIOS setting, execute "Save
Settings" of "Save or Restore" on "Configuration" menu of the Server Web Console to back up
the system information on the management module. When the management module fails, the
status of the module can be recovered to the status before the failure by restoring the backed up
information after the module replacement.
60