Open - NEC Express 5800 User Manual

open

Function:
This command expands device information under the entries of device list specified by argument.
It does not show the device list.
Argument:
cmd arg
open x
all
(Screen image)
<ENTER>
TeDoLi> list
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List
+----+-+---------------------------------+------------+----+-------------+
：
| 10|!|+PMM6
| 12|!|+BM
+----+-+---------------------------------+------------+----+-------------+
<ENTER>
TeDoLi> open 12
TeDoLi> list <ENTER>
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List
+----+-+---------------------------------+------------+----+-------------+
：
| 10|!|+PMM6
| 12|!|-BM
| 13|!| -BM/MB/PCI14
| 14|!| Port1
| 15|!| -BM/MB/PCI8
| 16| | Port1(eth0)
| 17|!| -BM/MB/PCI9
| 18|!| -Port1
| 19|*| SCSI-ID0 LUN0(iStorage 1000) |HDD
| 20|!| Port2
+----+-+---------------------------------+------------+----+-------------+
Expands devices under the specified device number.
Command is ignored when there is no device under the device.
x : Test device number
Expands all the devices under the device.
673
Operation and Maintenance
Description
| Type |Prev| Status
|MODULE | |
|MODULE | |
| Type |Prev| Status
|MODULE | |
|MODULE | |
|SCSI(NoDev) | |
|SCSI-PORT | |
|NIC | |
|ETH-PORT | |
|FC | |
|FC-PORT | |
| |
|FC-PORT | |
Description
number
|
|
|
|
|
|
|
|
|
|
|
|
|
|