NEC Express 5800 User Manual page 456

(8) Monitoring Stalling
Display/set setting information related to stall monitoring.
Property
BIOS POST Stall Policy
OpROM Stall Policy
OS Boot Stall Policy
Failure Flow Stall Policy
Shutdown Stall Policy
Description
You can set timeout value if monitoring of stall
for BIOS POST.
⁃ Timeout value
An operator can designate monitoring time by
minute unit. (Settable value: 0-60)
Enable or disable monitoring of the OpROM
stall.
An operator can set timeout value if monitoring
of stall is enable.
⁃ Enable : Enable monitoring of stall
⁃ Disable : Disable monitoring of stall
Enable or disable monitoring of the OS boot
stall.
An operator can set timeout value if monitoring
of stall is enable.
⁃ Enable : Enable monitoring of stall
⁃ Disable : Disable monitoring of stall
⁃ Timeout value
If monitoring is selected to "Enable", An
operator can designate monitoring time by
minute unit. (Settable value: 0-100)
Enable or disable
automatically after fatal error occurred and the
time exceeded the timeout value.
An operator can set timeout value.
⁃ Enable : Enable monitoring of stall
⁃ Disable : Disable monitoring of stall
⁃ Timeout value
If "Enable" is selected, an oparetor can
designate monitoring time by minute unit.
(Settable value: 0-60)
This value needs to be more than the time
to take the OS crash dump, so a user must
specify the appropriate value depending on a
user's hardware configuration.
Enable or disable monitoring of OS shutdown
stall.
you can set timeout value if monitoring of stall is
enable.
⁃ Enable : Enable monitoring of stall
⁃ Disable : Disable monitoring of stall
⁃ Timeout value
456
rebooting the server
Default
setting
Timeout
value ： 10
minutes
Disable
Disable
Timeout
value：1
minute
Enable
Timeout
value：30
minutes
Enable
Timeout
value：10
minutes