Fail - NEC Express 5800 User Manual

fail

Function:
This command displays all the test information having "Failure" status.
(Screen image)
<ENTER>
TeDoLi> fail
--------------------------------
CELL0/IOM0/PAM1/PCI1/Port0(eth0)
--------------------------------
Device number
Terminated the test due to an unexpected error.
Set loopback mode error.
Ether operation error occurred.
API status : 00 (H)
Driver status : 5f (H)
Set loopback mode is not completed.
Controller registers :
000c0241 00080380 04008002 00001000
00000000 000000fe 00000000 310000f8
00001000 00000000 00000000 00000008
00000004 00000000 00000000 00000000
(Description)
Description
number
(a) Component name is displayed.
(b) Device number is displayed.
(c) Detailed information of Fail is displayed.
: 12
Description
680
Operation and Maintenance
Description
number
(a)
(b)
(c)