Select - NEC Express 5800 User Manual

select

Function:
This command sets devices specified by argument as test target.
Argument:
cmd arg
x
select
Type
all
(Screen image)
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List
+----+-+---------------------------------+------------+----+-------------+
：
| 4|!|-MGM2
| 5|!| -MGM2/MGB/GbE
| 6| | Port1(eth1)
| 7| | Port2(eth2)
：
<ENTER>
TeDoLi> select 4
<ENTER>
TeDoLi> list
+----+-+---------------------------------+------------+----+-------------+
| Num|*| Device List
+----+-+---------------------------------+------------+----+-------------+
：
| 4|!|-MGM2
| 5|!| -MGM2/MGB/GbE
| 6|*| Port1(eth1)
| 7|*| Port2(eth2)
：
Sets specified device number as test target.
Devices under the selected device become also the test target.
x: Test device number
Multiple device numbers can be specified (select x1 x2 x3···).
Sets specified device type as test target.
Type: Test device type
Multiple device types can be specified (select type1 type2···).
Sets all the existing device as test target.
682
Operation and Maintenance
Description
| Type |Prev| Status
|MODULE | |
|NIC | |
|ETH-PORT | |
|ETH-PORT | |
| Type |Prev| Status
|MODULE | |
|NIC | |
|ETH-PORT | |
|ETH-PORT | |
Description
number
|
|
|
|
|
|
|
|
|
|