Reset And Clear; Hard Reset - NEC Express 5800 User Manual

Express5800 series

Hide thumbs Also See for Express 5800:

Table of Contents

Reset and Clear

Refer to this section when the server does not operate or when the setting contents previously

set in BIOS need to be restored to the factory default.

When the reset is required after setting BIOS, Web BIOS, etc. and the server does not

operate properly, the server can be reset by the following procedures.

1. Reset from EXPRESSSCOPE® Monitor

Operate navigation buttons of EXPRESSSCOPE® Monitor and perform the following from

Operation Menu.

Select "Serverx -> Chassis Control -> Hard Reset."

2. Reset from server Web Console

After connecting to server Web console, perform the following from Summary (sub menu).

Click "Hard Reset" button.

3. Reset from BIOS menu

Start BIOS and perform the following from Main Menu of BIOS.

Select "Boot Maintenance Manager -> Reset System."

4. Reset from SMASH-CLP

Refer the chapter of SMASH-CLP for details.

Hard reset clears memory inside DIMM of the server and the data

being processed. To perform reset besides when the server hangs

up, ensure that no process is operated by the server.

Show Quick Links

Table of Contents