NEC Express 5800 User Manual page 458

(10) Power
Display/set setting information related to power.
Property
Power Restore Policy
Power On Delay Time
Power Cycle Interval
CPU Throttle Mode
CPU Throttle Mode Current
14
An user can suppress the server consumption by lowering P-state. It has the eight level, and the lower level is, the
higher server consumption will be.
Description
Specify the DC power action when AC powered
on.
⁃ DC stays off when AC is applied
Maintain DC powered-off after AC power
supplied.
⁃ Restore DC to previous state prior to AC loss
Restore DC-power to the previous DC Power
status before AC lost.
⁃ Always DC on when AC is applied
DC power will be always powered on after AC
power supplied.
⁃ Delay Time
A user can designate the delay time for DC
power will be supplied after AC powered on by
second unit. (Settable value: 20-255)
Specify the interval time between DC power on
and DC power off.
⁃ Interval Time
A user can designate the power cycle interval
time by second unit. (Settable value: 0-255)
Specify P-State for power saving.
14
⁃ P-State
A user can designate P-state value of processor
for the power saving. (Settable value: 0-7)
P-state Clock
P0 High
：
P7 Low
Current P-state is displayed.
458
Default
setting
DC stays off
when AC is
applied
20 seconds
0 second
Power
0
Consumption
(Voltage)
High
Low
-