Server Menu
Enter Password Menu
When LCD Guard Mode is set to "Enable," the screen moves to Enter Password Menu by
selecting and executing "Restore SVRx >" in the Server Menu status.
E n t e r
0 0 0 0
Select "Up" or "Down" button to change numbers on the cursor one by one in the range from
0 to 9. Default value is set to All 0.
Select "Left" or "Right" button to move the cursor from side to side.
When Pressing "OK" button, the screen moves to Server Menu, Restore Defaults Menu
(next page) if the entered value matches the password.
When it does not match, Password Not Match screen (below image) is displayed.
R e s t o r e
P a s s w o r d
(1) Server Number
When pressing "OK" button, it returns to Server Menu.
P a s s w o r d
S V R 1
N o t
: Server Number [1] or [2] is displayed.
M a t c h
251
Hardware
(1)