(7)
(7)
Indicates the completion of update.
IMPORTANT:
In A1080a-D model, the version of Management Firmware of
each server must be the same. Therefore, Please run firmware
update at system Web console so that all version of firmware is
same.
IMPORTANT:
NEC unrecommends the firmware update operation to you while
the DC power is on because the application of the OS may not
work well.
In A1080a-D model, if another server is starting up, don't run
firmware update operation until the status of another server will
be "OS Running or EFI Manager Booted".
Don't run firmware update operation until the status of this
server will reach to "Stopped" after power-off.
In A1080a-D model, if another server is stopping, don't run
firmware update operation until the status of another server will
reach to "Stopped".
If the firmware update completed, please clear the cache of the
web browser.
427