Setting Up Windows Server 2008/Windows Server 2008 R2; Setting Up Redhat Enterprise Linux Version6 - NEC Express 5800 User Manual

Setup of OS
After completing the hardware setup, proceed to set up the OS.
Contact the distributor from which you purchased or the maintenance service company for
installation procedure of Windows other than Windows Server 2008/Windows Sever 2008 R2.
Setting up Windows Server 2008/Windows Server
2008 R2
After completing the hardware setup, set up Windows Server 2008/Windows Server 2008 R2
and the system.
Refer to "Introduction" and "Hardware" for the hardware setup procedure.
Refer also to the following online manuals included in the attached "EXPRESSBUILDER" for
Windows Server 2008 and the system setup.
- Installation Guide (Windows)

Setting up RedHat Enterprise Linux version6

After completing the hardware setup, set up RedHat Enterprise Linux version6 and the system.
Refer to "Introduction" and "Hardware" for the hardware setup procedure.
After completing the OS setting up, check if the file listed below exists and the description shown
below is in the file.
If the file does not exist, make it includes the description.
File name :
/etc/X11/Xorg.conf
Description :
Section "Device"
Identifier "Videocard0"
Driver "vesa"
EndSection
Reboot the OS after the setting has finished.
IMPORTANT :
● If the description in the file is not correct, OS display on the screen
may not be displayed correctly.
● Copy the Xorg.conf file for the backup before editing it.
69