Center Shift
When the [Center Shift] key is pressed, the Center Shift function is activated. This
function centers the entire original on the copies.
The Center Shift function is selected and the [Center Shift] key indicator is lit when the power is
turned ON in the default state of the copier.
If the original size and the copy paper size are the same and the copy ratio is set to 100%
(Direct), the Shift functions cannot be used.
Press the [Center Shift] key.
The [Center Shift] key indicator is lit.
Canceling the Center Shift Function
When the [Center Shift] key is pressed again, the Center
Shift function is set to Off.
When the following setting is made, the Center Shift
function is automatically set to Off.
The Original Size Recognition function has been
canceled (see p. 2-16).
Shift settings have been made in the Sp. Feature Mode
(see p.4-2).
Using the Control Panel Keys
Using the Control Panel Keys
Basic
2-17
Mode
2