How to Designate Areas
7
After designating all necessary
points, press the [OK] key.
8
Press the key for the image editing
to be set.
For details on the respective function setting methods, see
the following pages.
Framing
: "Framing/Blanking," on p. 10-2
Blanking
: "Framing/Blanking," on p. 10-2
Original Type
: "Original Type Selection," on p. 2-41
Color Balance
: "Adjusting Colors," on p. 6-2
Single Color
: "Single Color," on p. 7-21
Color Conversion : "Color Conversion," on p. 7-39
Color Gradation
: "Color Gradation," on p. 7-22
Base Color
: "Base Color," on p. 7-36
Color Filter
: "Color Filter," on p. 7-29
Paint
Text Editing
: "Text Editing," on p. 8-12
Texture
: "Texture," on p. 8-21
Nega/Posi
: "Nega/Posi," on p. 8-2
Advanced
9-4
Mode
Designating Areas with the Edit Pen
To add areas or change a
designated area, press the [Add/
Modify Area] key.
To delete all areas in an area
group, press the key indicating
the area group to be deleted, and
then the [Clear Group] key.
The confirmation message is
displayed. If the [Yes] key is
pressed, all the areas in the
selected area group are deleted.
If the [No] key is pressed, the
display returns to the screen for
selecting an image editing.
The paint function adds color in
an entire designated area.