4
Press the [Register] key.
5
Press the mode memory key for
storing the copy settings.
6
Press the [Next] key.
7
Press the [Yes] key.
After the message "Stored in memory" is displayed, the
key with the stored settings is highlighted, and then the
screen with the content of the stored copy settings is
displayed.
Storing/Recalling Mode Memory
Storing Mode Memory
The mode memory key where
copy settings are already stored
shows a small, black square ( )
in the lower right corner of the
key.
If the mode memory in which
copy settings are already stored
is selected, the content of the
stored settings is displayed.
If the mode memory with the
copy settings stored is selected
and new settings are registered,
the stored settings are updated
with the new settings.
To change the content of the
settings to be stored or to cancel
storing the settings, press the
[No] key.
Mode Memory/Recall/
12-3
Additional Functions
12