Oce COLOR SYSTEM 110 Operator's Manual page 112

Sheet Frame Erase
To specify different values for top,
bottom, left, and right frame erase widths
The frame erase width can be specified for the top, bottom,
left, and right independently of each other.
Press the [Adjust Each Dim.] key on the screen for
specifying the frame erase widths.
1
Press the [Adjust Each Dim.] key.
2
Press the [Top], [Left], [Right], or
[Bottom] key, and enter each width
value using the [-] and [+] keys.
3
Press the [OK] key.
The display returns to the Sp. Feature screen, and the
[Frame Erase] key is highlighted.
The copier is now ready to make copies.
Advanced
5-6
Mode
Erasing Shadows from Copies
If any frame erase width has
been specified in another Frame
Erase mode, that set value is
retained as the frame erase
width. Care must be taken.
To enter values in units of mm,
press the mm key.
Press the [Adjust All At Once]
key to set the top, bottom, left,
and right frame erase widths to
the same value.