Oce COLOR SYSTEM 110 Operator's Manual page 219

5
Press the [
specify the width of the contour.
The width of the contour can be specified in units of 0.25
mm.
6
Press the [OK] key.
The Text Editing screen is displayed, and the [Contour]
key is highlighted.
7
Press the [Done] key.
The display returns to the Image Creation screen, and the
[Text Editing] key is highlighted.
8
Press the [Done] key.
The display returns to the Sp. Feature screen, and the
[Image Creation] key is highlighted.
Image Creation
] or [ ] key to
Text Editing
To add color to the specified
contour, press the [Contuour
Color] key to specify a color. For
details, see "To specify a color for
the contour," on p. 8-16.
The contour type (inner or outer
contour) can also be specified.
For details, see "To specify the
contour type," on p. 8-16.
Advanced
8-15
Mode
8