Oce COLOR SYSTEM 110 Operator's Manual page 367

4
Place the output Test Print 1 on
the platen glass.
Position the Test Print 1 so that the black band is located
on the far side of the platen glass and the printed side is
face down.
5
Press the [Scan] key.
6
Press the [Test Print 2] key.
The message "Printing Test Print 2" is displayed, and the
Test Print 2 is output.
7
Place the output Test Print 2 on
the platen glass.
Position the Test Print 2 so that the yellow band is located
on the far side of the plate glass and the printed side is
face down.
Adjustment/Cleaning
Automatic Gradation Adjustment
Mode Memory/Recall/
Additional Functions
13
13-59