Setting the Copy Ratio in XY Zoom Mode
Different copy ratios can be set in the X (horizontal) and Y
(vertical) directions.
1
Press the [XY Zoom] key.
2
Enter the X and Y sizes of the
original, respectively, using the
number keys displayed on the
screen.
3
Enter the X and Y sizes of the
copy, respectively, using the
number keys displayed on the
screen.
Advanced Zoom Functions
Zoom Program
To enter values in units of mm,
press the mm key.
To set the same copy ratio in the
horizontal (X) and vertical (Y)
directions, press the [Zoom] key.
For details, see page 3-3.
Basic
Mode
3
3-5