To change the size of a designated area
1
Select an area to change its size
by pressing the corresponding
key.
2
Press the [Adjust Area] key.
The screen to move the area with the direction keys is
displayed.
3
Press the [Enlar/Redu Area] key.
4
Change the area size using the
direction keys.
5
Press the [Done] key.
The display returns to the screen for designating areas.
Designating Areas with the Edit Pen
How to Designate Areas
If an area has been designated
in Polygon, Free, Trace, or
Enclosed Area mode, its size
cannot be changed.
Press the [Move Area] key to
display the screen for moving the
designated area. For details, see
"To move a designated area,"
on p. 9-6.
Advanced
Mode
9
9-7