Table of Contents
Advertisement
4
Press the [-] or [+] key to specify
the frame erase width.
5
Press the [OK] key.
The display returns to the Sp. Feature screen, and the
[Frame Erase] key is highlighted.
The copier is now ready to make copies.
Erasing Shadows from Copies
Sheet Frame Erase
If any frame erase width has
been specified in another Frame
Erase mode, that set value is
retained as the frame erase
width. Care must be taken.
To enter values in units of mm,
press the mm key.
Press the [Adjust Each Dim.] key
to specify the top, bottom, left,
and right frame erase widths
independently of each other. For
details, see "To specify different
values for top, bottom, left, and
right frame erase widths," on
p. 5-6.
Advanced
Mode
5
5-5
Advertisement
Table of Contents
