Oce COLOR SYSTEM 110 Operator's Manual page 220

Text Editing
To specify a color for the contour
Copies with only the contours can be made with a specified
color.
1
Press the [Contour Color] key.
2
Select a color.
3
Press the [OK] key.
The display returns to the Contour screen.
To specify the contour type
The direction for thickening the contour (toward the outside
or inside of characters) can be specified.
1
Press the [Countour Type] key.
The screen to select a method for producing the contour
is displayed.
2
Press either the [Inner Contour] or
[Outer Contour] key to specify the
contour type.
3
Press the [Done] key.
The display returns to the Contour screen.
Advanced
8-16
Mode
Image Creation
There are five methods for
selecting a color:
• Color Palette Selection
(see p. 7-2)
• Color Circle Selection
(see p. 7-7)
• Registered Color Selection
(see p. 7-9)
• Designated Color Selection
(see p. 7-11)
• Original Color Selection
(see p. 7-14)
Outer contour
Inner contour