Oce COLOR SYSTEM 110 Operator's Manual page 195

9
Press the [OK] key.
To set other coloring areas (groups), repeat from Step 5.
10
Press the [OK] key.
The display returns to the Color Creation screen, and the
[Coloring] key is highlighted.
11
Press the [Done] key.
The display returns to the Sp. Feature screen, and the
[Color Creation] key is highlighted.
The copier is now ready to make copies.
To add color to the background
There are two modes for adding color to the background;
Designated Area and Entire Enclosed.
Original
1
Press the [Background Color] key.
Color Creation
Designated Area Entire Enclosed
Coloring
You can add/change a point to/in
the designated area by pressing
the [Add/Modify Point] key while
you are making the coloring
settings.
To clear a coloring area (group),
select the coloring group to be
cleared, and then press the
[Clear Group] key.
Advanced
7-33
Mode
7