Oce COLOR SYSTEM 110 Operator's Manual page 334

Thin Paper Feed Location
4
Select a drawer to be used for
feeding thin paper.
The selected drawer is highlighted, and the thin paper
icon is displayed.
5
Press the [OK] key.
The display returns to the Custom Settings screen.
6
Press the [Done] key.
The display returns to the screen for selecting an
Additional Functions feature.
7
Press the [Done] key.
The screen returns to the standard display.
Mode Memory/Recall/
13-26
Additional Functions
Custom Settings
If a thin paper feed location is
already registered, the
corresponding drawer is
highlighted.
To cancel the settings for the thin
paper feeding location, select the
highlighted drawer again. The
highlight and the transparency
icon disappear, and the settings
are canceled.
The drawer registered as the thin
paper feeding location cannot be
set to "On" for Drawer Eligibility
for APS/ADS.