Oce COLOR SYSTEM 110 Operator's Manual page 270

4
Place the originals on the Editor.
Align the original (color) to be inserted and the
background original (black and white) with the positioning
mark , respectively.
Original to
be inserted
5
Designate the area extracted from
the color original using the edit
pen.
6
Press the [Post-Shift Area] key.
7
Using the edit pen, designate the
area in the black-and-white
original where the extracted image
is to be inserted.
8
Press the [Next] key.
Inserting Text
ABC
Background
original
Image Composition
For instructions on designating
an area by pressing the [Desig.
Methods] key and selecting an
area shape, see "Area
Designation Type and Method,"
on p. 9-8. However, an enclosed
area cannot be set in area
designation for the Image
Composition features.
To delete an entered point, press
the [Clear Point] key.
To delete the designated area,
press the [Clear Area] key.
To adjust the designated area,
press the [Adjust Area] key. For
instructions on the area
adjustment method, see
"Adjusting Designated Areas," on
p. 9-6.
Advanced
11-3
Mode
11