Oce COLOR SYSTEM 110 Operator's Manual page 223

8
Press the [Done] key.
The display returns to the Sp. Feature screen, and the
[Image Creation] key is highlighted.
The copier is now ready to make copies.
To specify a shadow length
1
Press the [Shadow Length] key.
The screen to specify the shadow length is displayed.
2
Press the [
specify the shadow length.
The shadow length can be specified in units of 0.25 mm.
3-D shadow Flat shadow
If Flat Shadow or Flat Shadow only has been selected,
the entered value will be the distance from the original text
to the shadow.
3
Press the [Done] key.
The display returns to the screen for selecting a shadow
type, and the [Shadow Length] key is highlighted.
Image Creation
] or [ ] key to
3-D shadow only Flat shadow only
Text Editing
Advanced
8-19
Mode
8