Color Registration
8
Confirm the content of the color to
be registered, and then press the
[Yes] key.
The screen to register/erase a color is displayed.
9
Press the [Done] key.
The display returns to the Sp. Feature screen.
To check the registered color
You can output and check the registered color.
Press the key of the registered color, and then press the
[Sample Print] key. The registered color is output so that
you can check the color.
Advanced
7-18
Mode
Registering Colors for Use
To cancel the registration or to
change the color to be
registered, press the [No] key.
Sample print output requires the
IP-ED board.
Sample prints are counted in the
number of copies made.