Table of Contents
Advertisement
5
Specify the second point, and then
press the [OK] key.
6
Press either the [Framing] or
[Blanking] key.
7
Press the [OK] key.
The display returns to the Sp. Feature screen, and the
[Framing/Blanking] key is highlighted.
The copier is now ready to make copies.
Designating Images/Text to be Copied
Framing/Blanking
Press the [Clear Area] key to
delete the designated area.
To designate another area, press
the next Area No. key.
To edit the image in each area,
press the target Area No. key, and
select the image editing feature.
To change or delete an area,
press the [Re-enter/Clear Area]
key. For details, see "To re-enter
an area," on p-10-7 , or "To delete
an area," on p. 10-8.
Advanced
10-5
Mode
10
Advertisement
Table of Contents
