Oce COLOR SYSTEM 110 Operator's Manual page 117

To specify different values for top,
bottom, left, right, and center frame erase
widths
The frame erase width can be specified for the top, bottom,
left, right, and center independently of each other.
1
Press the [Adjust Each Dim.] key.
2
Press the [Top], [Left], [Center],
[Right], or [Bottom] key, and enter
each width value using the [-] and
[+] keys.
3
Press the [OK] key.
The display returns to the Sp. Feature screen, and the
[Frame Erase] key is highlighted.
The copier is now ready to make copies.
Erasing Shadows from Copies
Book Frame Erase
To enter values in units of mm,
press the [mm] key.
If any frame erase width has
been specified in another Frame
Erase mode, that set value is
retained as the frame erase
width. Care must be taken.
To enter values in units of mm,
press the [mm] key.
Press the [Adjust All At Once]
key to set the top, bottom, left
and right frame erase widths to
the same value.
Advanced
5-11
Mode
5