Oce COLOR SYSTEM 110 Operator's Manual page 279

Character Composition
To designate an area to be scanned
1
Press the [Scan Area Designation]
key.
2
Press either the [Framing] or
[Blanking] key.
Press the [Framing] key to scan only the image inside the
designated area.
Press the [Blanking] key to scan only the image outside
the designated area.
3
Place the text original on the
Editor.
4
Press two points of the opposing
corners of the area to be scanned
using the edit pen, and then press
the [OK] key.
Advanced
11-12
Mode
Inserting Text
To delete an entered point, press
the [Clear Point] key.
To delete an entered area, press
the [Clear Area] key.