Table of Contents
Advertisement
3
Select a key to be set as the
standard key, and then press the
[Register] key.
4
Select a feature group in which the
target feature is included.
Example: Standard Key 1: Setting "Photo" in "Original
Type"
5
Press the target feature key to be
set in the standard key.
6
Press the [OK] key.
The screen to select a standard key No. is displayed, and
the feature "Photo" set in Standard Key 1 is displayed.
7
Press the [Done] key.
The display returns to the screen with the Custom
Settings items displayed, and "W/Settings" is displayed for
"Standard Key Settings".
Custom Settings
Standard Key Settings
When a registered standard key
is selected, the selected standard
key No. and assigned feature are
displayed.
If the selected key has already
been registered as the standard
key, the key corresponding to the
mode that has been registered is
highlighted.
If the [No Settings] key is
pressed, the registered feature
setting of the standard key is
changed to "No Settings."
If "No Settings" is selected, no
standard key is displayed on the
screen.
If the key of your target feature to
be set is not displayed, press the
[
] or [
] key to display the
target feature key.
One feature can be set in one
standard key.
Mode Memory/Recall/
13-5
Additional Functions
13
Advertisement
Table of Contents
