Table of Contents
Advertisement
Book Frame Erase
4
Select the size of the bound
original, and press the [Next] key.
5
Press the [-] or [+] key to specify
the frame erase width.
6
Press the [OK] key.
The display returns to the Sp. Feature screen, and the
[Frame Erase] key is highlighted.
The copier is now ready to make copies.
Advanced
5-10
Mode
Erasing Shadows from Copies
The original size designation
mode can be selected from two
types; A/B size and inch size.
The mode can be changed by
pressing the [Inch-Size] or
[A/B-Size] key.
Press the [Adjust Each Dim.] key
to specify the top, bottom, left,
right, and center frame erase
widths independently of each
other. For details, see "To specify
different values for top, bottom,
left, right, and center frame erase
widths," on p. 5-11.
To enter values in units of mm,
press the [mm] key.
Advertisement
Table of Contents
