Area Designation Restrictions
When Designated Areas Overlap
If designated areas overlap, the image editing function programmed last has priority as the setting
for the overlapping portion of the areas.
If an image editing function was programmed for the entire copy while an area designation was
already in place, the area editing always takes priority, regardless of the order in which the editing
function settings were made.
If Framing and Blanking areas overlap
The one designated last has priority.
• If Blanking has been designated after Framing designation
Area Editing 1
Framing
Area Editing 2
• If Framing has been designated after Blanking designation
Area Editing 2
Framing
Area Editing 1
If areas with the same image editing
function settings overlap
The image editing is performed for all of the designated
areas, including the overlapping area.
Designating Areas with the Edit Pen
Blanking
Blanking
For instructions on Framing/
Blanking, see "Framing/Blanking,"
on p. 10-2.
Advanced
9-19
Mode
9