Table of Contents
Advertisement
❍ Common Keys on the Touch Panel Display
The Touch Panel Display has the following common function keys:
[Cancel] key: Closes the current setting screen and retains the programmed copy settings
during Additional Functions mode.
[Next] key:
Fixes the copy settings made and proceeds to the next step.
[Back] key:
Returns to the previous step with the current settings retained.
[Done] key:
Closes the current screen.
[OK] key:
Finalizes the copy settings being made.
❍ Display of keys
If a key displayed on the screen is pressed (touched), the key is highlighted and the
corresponding mode or function is set.
Some keys are not highlighted, depending on the nature of the key. A key that is highlighted
indicates that the corresponding mode or function is set.
❍ Inoperative keys
Some keys cannot be used when the functions are combined in certain ways; the keys are
grayed out and cannot be used in this case.
On CS 110/115, the keys of the functions unavailable in combination with the previously
selected function are grayed out.
❍ Optional keys
Keys that require optional equipment are displayed only if the corresponding optional
equipment is installed in the copier.
Components and Their Functions
Control Panel and Touch Panel Display
Before using
the Copier
1
1-7
Advertisement
Table of Contents
