Table of Contents
Advertisement
Nokia M11 User's Manual
5.4
Software download
New software can be downloaded to M11 through the 10Base-T
Ethernet interface or through one of the active ATM channels. Nokia
M11 uses Trivial File Transfer Protocol (TFTP) to download the
software from a TFTP server located on the Ethernet LAN. The
downloading is activated from the console port using the following
CLI command:
install [server_address] [filename] {confirm}
Command
Description
Syntax
Arguments
Example
5-92
Download software update
Downloads a new version of the Nokia M11 operating
software from a TFTP (Trivial File Transfer Protocol)
server, validates the software image, and programs the
image into the Nokia M11 memory. After you install new
operating software, you must restart M11.
install [server_address] [filename] {confirm}
The TFTP server must be accessible on your Ethernet
network or through one of the active ATM virtual chan-
nels and a route to the server must exist. The server
address argument identifies the IP address of the
TFTP server on which your Nokia M11 operating soft-
ware is stored. The filename argument identifies the
path and name of the operating software file on the
TFTP server. If you include the optional confirm key-
word, you will not be prompted to identify a TFTP
server or file name. Your Nokia M11 begins the soft-
ware installation using its default boot settings.
M11> install 192.168.1.1 M11c_500.d39
*** WARNING *** YOU ARE ABOUT TO ERASE
AND REPROGRAM THE NOKIA M11'S PERMANENT
SOFTWARE STORAGE WITH A NEW SOFTWARE VER-
SION OBTAINED VIA THE TFTP PROTOCOL.
About to install new Flash EPROM software
image:
server: 192.168.1.1
file: "M11c_500.d39"
Do you wish to proceed? (type 'yes' to
confirm): yes
Installing
M11>
E Copyright Nokia Networks Oy
C33833001SE_00
Advertisement
Table of Contents
